My Finished Kitchen Backsplash

One thing I really wanted to finish this month was my kitchen backsplash. For an apartment I have a fairly large kitchen with a decent amount of counter space but there was NO BACKSPLASH at all. The wall between the countertops and the bottom of the cabinets was always getting splattered with stuff and was so annoying to clean. I’d been planning on painting it (which had never been done in the 10+ years I’ve lived here) but in my heart I was wishing for tile. Of course I wasn’t about to shell out for actual tile in a rental apartment so I went with the next best thing: STICKERS.


We use this little mouse kitchen timer to limit Gwen’s screentime.

Is a faux tile peel & stick backsplash tacky? Probably, but it is 1000% better than what was there before, ie nothing. After doing some research I decided to go with tiles from Smart Tiles, which had the best reviews. They have a lot of different options but I wanted a) simple and b) cheap so I went with plain white subway tiles. The best price I found for them here in Canada was at Lowe’s, where a pack of six sheets of fake tiles (a little under a square foot each) is $47 (most other places here have them at 1 sheet for $9.99). They were actually cheaper ($43) when I bought them and I also waited to buy them on sale to save a little extra.

I am not going to pretend I’m like a super pro at installing these because I made a lot of mistakes. Good news though, you can learn from them! I have a few tips as to how you can make your faux tile installation as hassle-free as possible:

1. USE THE CALCULATOR ON THE SMART TILES SITE. Each product page has a calculator that will let you know how many of that type of tile sheet you need to cover your surface area. I didn’t realize this and initially ordered based on my own estimation and WOW it was wildly inaccurate. I only had enough sheets to do one wall and had to wait for them to go on sale again to order more and finish the job.
2. MEASURE YOUR CUTS ACCURATELY. Part of the reason I ran out of my first batch of tiles so quickly is because I kept messing up the cuts I needed to do. I ended up being able to use most of the flubbed sheets anyway (I did a narrow strip of wall from floor to ceiling which used a lot of scraps) but I def would have saved at least some money by not screwing up.
3. START WITH THE EASIEST WALL FIRST. For some reason I thought I should start with the wall behind my stove, which meant all sorts of tricky cuts AND the biggest surface area to fill. This is also why I messed up a lot, and I realized after I should have started with the easiest and smallest wall, between the fridge and the window, where the only cuts were just a couple straight edges and a cut out around an outlet.
4. USE TAPE WHEN MAKING CUTS. You can cut these tiles with just a box cutter, cork-backed metal ruler and a cutting mat, but it was easier for me to cut the straight edges with the tile taped to the mat so it wouldn’t slide around. When I had to make unusual cuts (around corners or outlets) I would put tape on the front of the tile in the general area I needed to cut and then draw my cutting lines on the tape (this worked better for me that drawing them on the back, which I messed up a lot). Painter’s tape left the least residue but scotch tape worked fine as well.


The Nespresso & Baby Brezza formula dispenser are both plugged in here and both have large and visible black plugs & cords. I used this outlet cover the disguise the plugs & somewhat wrangle the cords.

Thankfully, the look of these tiles is forgiving and hides a lot of mistakes, and even when I’ve challenged people to figure out my most egregious error that haven’t been able to figure it out (or they are just being nice, who can say). Overall I’m happy with the results and would definitely use this product again.

2 Replies to “My Finished Kitchen Backsplash”

Leave a Reply

Your email address will not be published. Required fields are marked *